Instructions For Use

It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
It is not recommended for persons sensitized to dithiocarbamates to use these gloves.
Put the gloves on dry, clean hands.
Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.

Storage Conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering Conditions

Before taking off the gloves, clean them as appropriate:

In use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
In use with a solvent (diluents, etc...): rub over with a dry cloth
In use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : using the gloves or submitting them to cleaning or laundering process which are not specifically recommended can alter their performance levels.

Drying Conditions

Ensure the inside of the gloves is dry before putting them on again.