Features

Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system)

Optimal dexterity without compromising chemical resistance

Better resistance than natural latex gloves against organic solvents

Recommended for people sensitive to the proteins in natural latex

Instructions For Use

Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.

Unpack and put on the gloves according to the gowning procedure in the workplace. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.

Put the gloves on dry, clean hands.

It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.

Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.

Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.

Take off the gloves without touching the external surface : pull off a first glove and hold it with the gloved hand. Fold back the cuff edge of the second glove over both gloves and discard in appropriate refuse container.

Storage Conditions

Store the gloves in their packaging protected from light, humidity and heat.